Tips on how to Reset the Verify Engine Light on a 2008 Toyota Tundra 1Find the diagnostic link connector (DLC) on the driver's dashboard above the steering column. You can know you've positioned the correct port by examining the size and shape of it and comparing it for the size and shape in the OBD II scan tool's connective cable.
It needs to be trapezoidal in shape.2Plug the OBD II scan tool into the diagnostic hyperlink connector (DLC) from the Tundra. Don't force the tool into the port for the reason that undertaking so could bend the pins inside.3Put the important in to the ignition and turn it towards the "on" position. Do not let the engine get started, however.
The "on" position turns on the electrical systems in the vehicle and powers on the OBD scan tool.4Look at the OBD II scan tool's screen. Use the arrow keys to scroll to the "erase code" or "reset" command. Press "select" Auto diagnostic tool; or "enter" to choose the erase selection. Wait for the principle menu of your scan tool to seem.5Turn off the automobile and unplug the scan tool from the port. Wait a single minute and then turn on the engine. Look in the instrument panel to confirm that the verify engine light has shut off Auto diagnostic tools.
Related articles:
No comments:
Post a Comment