How you can Study 1991 Nissan Maxima Difficulty Codes 1Locate the open access port for the OBD plug towards the left of your fuse panel cover inside the driver's side footwell.2Plug the OBD scan tool plug in to the open access port and turn on the scan tool.3Turn the ignition essential to the "II" position.
4Wait for the display on the OBD scan tool to study "OK," then turn off the ignition and unplug the scan tool.5Access the menu options on your scan tool and scroll to the "stored codes" section of the menu. This is where all of the codes you just retrieved will be stored. Reference your Maxima's service manual to translate the codes.
How you can Pull Up the Codes for the 98 Jeep Cherokee 1Plug the OBD II scan tool into the diagnostic port near the steering column on the underside of the driver's side dash.2Put the key into the ignition, and turn it for the " diagnostics car tool;II" position, taking care not to begin the engine. This may power on some scan tools automatically; others will need to be powered on together with the "on/off" switch. Wait though the scan tool retrieves the codes diagnostic car tool.3Write these alphanumeric codes down on a piece of paper and look up their diagnostic meanings in the scan tool's manual.4Unplug the scan tool from the port, and turn off the automobile.
Related articles:
No comments:
Post a Comment